|
| AML Industries, Inc. |
|
| Providing metalforming lubricants of the highest
quality in the most cost-effective manner. Visit
AML IND for more information.
|
| |
| Patriot Forge |
|
| For over half a century, Patriot Forge has been
defining quality and customer service in the forging industry. Visit
PATRIOT FORGE CO for more information on the company's
capabilities.
|
|
|
| Steel Dynamics, Inc. |
|
| SDI, Engineered Bar Products Division. A significant supplier of special-bar-quality (SBQ) steels. Visit STEEL DYNAMICS, INC for more information.
|
| |
|
|
Jim Clark, President |
|
 |
|
| |
|
|
|
|
METALFORMING LUBRICANTS AND PRECOATS |
Graphite In Water |
Hot metalworking lubricants for steel and aluminum.
|
Graphite/Synthetic |
Developed for applications with metal movement too severe for traditional synthetic lubricants. (Reduced graphite level compared to conventional graphite lubricants.)
|
Water Based Synthetic |
For use on hammers and presses as an alternative to graphite lubricants.
|
Glass Precoats |
Insulate, protect and lubricate the workpiece during forging, extrusion, rolling and other metalforming operations.
|
|
| |
| Bars and Shafts |
· 26 inches major diameter
· 40,000 lbs
· 400 inches long
|
| |
| Open-Die Rings and Disks |
· 75 inches outside diameter
· 18,000 lbs
|
| |
| Squares and Rectangles |
· 1200 square inches max. cross section
· 18,000 lbs
|
| |
| Sleeves |
· 40 inches outside diameter
· 22 inches inside diameter
· 120 inches length
· 18,000 lbs
|
| |
| Pots and Die Forgings |
· 75 inches outside diameter
· 18,000 lbs
|
| |
| Rolled Rings |
· 48 inches outside diameter
· 13 inches face length (height)
|
| |
| Diameters and Shapes |
1-1/2 inch to 9 inch Rounds
· Rounds from 1-1/2 inch to 6 1/16 inches will be available
in most 1/16-inch increments.
· Rounds from 6 1/4 inches to 9 inches will be available in
most 1/4-inch increments.
· Intermediate and metric sizes can be produced provided
certain minimum quantities are met.
Please inquire.
|
3-inch to 8-inch Round-Cornered Squares
· Round-cornered squares will be available in most 1/4
inch increments and are subject to accumulation.
· Intermediate and metric sizes can be produced provided
certain minimum quantities are met.
Please inquire.
|
| |
| Grades - AISI Carbon and Alloy |
· ASTM A36 and A572 Grade 50
· 1000 Series Carbon
· 1100 Series Resulfurized
· 1215 Rephosphorized and Resulfurized Carbon,
1500 Series Carbon
· 4000, 4100, 4300 Series Alloy
· 4600, 4700, 4800 Series Alloy
· 5100, 8600, 8700, 8800, 9300 Series Alloy
· Vanadium micro alloys, resulphurized grades,
bearing-quality grades, boron-treated steels
· High-chrome grades: F2, F11, F22, F5, F9
· Low-sulfur inclusion shape
· Controlled grades - DI
Special and/or restricted chemistries available upon request.
Heat lots may be required. Please inquire.
|
| |
|
|
|